Valve Extension Spindle
Valve Extension Spindle Technical Data
EJ Hadaways range of Australian standard valve extension spindles comply with AS/NZS 2638 gate vales for waterworks purposes and are used to open gate valves and services.
They are manufactured by welding a hot forged male and female end to pipe then hot dipped galvanised to AS/NZS 4680
Hot forged ends provide a stronger product than cast iron or plastic.
Our spindles have been mechanically torque tested to 600Nm with no distortion and meet all dimensional requirements of the relevant Australian Standards and are Australian made in Dandenong Victoria.
Spindles come with M10 x 20 galvanized setscrews to allow retention on the spindle cap. Our range starts from 150mm up to 6M long. Sizes from 150 to 2M are in stock and special lengths made within 48 hours. Australian standard spindles in 316ss can be supplied to order.
Valve spindle extensions are used to reach sluice and water main valves that are under ground and are deeper than the length of a Sluice valve key Part number: EJH-VK-SLUICE